Skip to content

Fork Mount Rail

(7 customer reviews)

From £59.00

  • Multiple channels enable Fork Mounts (not included) to be offset forwards and backwards, or at an angle with the bike’s handlebars turned.
  • Through-slots on each end allow you to bolt the Rail to your van’s cargo loop holes.
  • Or, use the pre-drilled countersunk holes to screw directly to your floor with screws, or threaded insert nuts & bolts.
  • BikeStow Tilting Fork Mounts attach to the Rail.
  • 2-Year Warranty & 30-Day No Quibble Returns.
  • CNC routed in-house from durable hexa birch plywood.
  • Note: Does not include any BikeStow Tilting Fork Mounts!
SKU: 18-000 Categories: ,

CLICK HERE FOR INSTRUCTIONS!

The “Dual” and “Triple” naming scheme refers to how many slots are on the Rail, not how many bikes fit!

The Rail must be fixed in place. You can either:

  • Bolt the Rail to your vehicles cargo loop holes, by unscrewing & removing the cargo loop and use one of our Vehicle Kits to bolt the Rail to these threaded holes. These cargo loops are normally found by the rear doors in your van. In passenger versions (e.g. Caddy Life), the bolts holding the cargo loops in place may be covered by plastic trim, in which case you will need to drill-through the trim to get access to these holes.
  • Screw the Rail directly to your ply-lined floor or MDF sub-floor (often under carpet) with standard wood screws.
  • Screw the Rail directly to your ply-lined floor or MDF sub-floor with our Insert Nut & Screw Kit, which allows you to frequently unscrew and remove the Rail without wearing any screw holes over time.
VEHICLE COMPATIBILITY
Vehicle Mounting KitRailMountain Bikes (with flat bars)Road Bikes (with drop bars)
DIY Insert Nut KitAnyYesYes
VW Caddy MK3, MK4, MK5 (excludes Caddy Life – Contact Us!)Dual 1130mmYesNo
VW Transporter T5 &T6Triple 1130mmYesYes
Ford Transit Connect 2nd GenTriple 1130mmYesYes
Ford Transit Connect 3rd GenDual 1130mmYesNo
Citreon Berlingo / Peugeot Partner / Vauxhall & Opel Combo – Van (2018 – Present)Dual 1130mm

Triple 1130mm

Yes

Yes

No

Yes

Have another vehicle? Contact Us!

Our advice is to always measure and mock-up the bikes in your vehicle first!

Roughly position the bikes in your vehicle with the front wheel removed, and check the handlebars won’t clash with anything such as the rear door as it closes. Also check that your cargo area is long enough to fit the bike.

Check the dimensions of your van and it’s cargo points, and compare them against these drawings:

All Rails measure 30mm thick.

If you have any questions or are unsure, feel free to Contact Us and we’ll happily help out!

HOW MANY BIKES WILL FIT?
  • 600mm Rail = 1-2 bikes
  • 850mm Rail = 2-3 bikes
  • 1130mm Rail = 3-4 bikes

The “Dual” and “Triple” naming refers to how many slots are on the Rail, not how many bikes fit!

RAIL DIMENSIONS

Click on the links below to open fully-dimension drawings for each Rail:

DRILLING TEMPLATES

If you’re using the DIY Insert Nut Kit or fixing the Rail directly to your floor with screws, you might want to use our drilling templates.

Simply print out the document onto A4 paper at 100% scale, line up the cross-hairs, and tape the pages together to create a full-scale drawing of the Rail. Use a ruler to double check it printed at the correct scale, and then use the hole locations on the drawing to mark or punch drill locations on your floor.

SPARES

Weight2.5 kg
Dimensions115 × 30 × 12 cm

7 reviews for Fork Mount Rail

  1. Kevin Wood –

    After speaking with BikeStow team the day before ArdRock 24! And asking all the questions I had regarding their products , I Purchased the tilting Fork Mount and mounting board for my Citroen Berlingo (M). The team were friendly and professional, the products are quality and made to a very high standard. IMO BikeStow products are simply value for money and look
    Pretty mint.

  2. MARIANNE RICHARDS (verified owner) –

    I purchased the Fork Mount Rail for the back of my VW T6.1. I have had a couple of bike systems for my van but I can say hands down this is the best one!!!!

  3. Alasdair Carnie –

    After speaking with Bikestow about my motorhome garage and e-bikes, and getting some great advice from them, I bought two sets of the tilting fork mounts and the attachment bar. Ordering was easy, and delivery was quick. Everything is very well designed, engineered, and easy to install. After driving my motorhome over some fairly rough roads, the bikes were rock solid in their mounts. All in all this is a great company to deal with.

  4. Scott Goodwin –

    Great products, well made, and well thought through. Excellent customer service, they always go the extra mile for service. I have the original A frame and now the fork mount and rail which I use to attach to sliding rear seat floor channels in my van. Works great. Thank you.

  5. Kristian Clarke (verified owner) –

    Purchased for my van build , customer service and quality of item second to none would highly recommend to anyone thinking of purchasing

  6. Stuart. (verified owner) –

    Ordered a Fork Mount Rail and two Tilting Brackets for a Caddy Maxi Life.
    Arrived next day and fitted it staight away.
    Very good quality of build and brilliant in use.
    Bikes take up much less room than my old setup.
    Julie also rang me and sent me some extra parts FOC after a slight mix up when I ordered.
    Top quality product and top customer service too.

  7. Mark –

    Hi bikestow! I got the fork mount rail in 1130 mm length and it perfectly fits in my VW T7 Multivan after removing the built in lashing eyes. I mounted the tilting fork mount on it and it also perfectly does what it should. Thanks for this great products.
    Greetings from Germany!
    Mark

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

Related products